Passer au contenu de la page Passer à la navigation Passer au pied de page
VÉHICULES POLARIS HORS ROUTE

CENTRE D'AIDE

3/22/2021
Planning and Uploading a Ride for Your Ride Command Display

Visit the Ride Command website on a computer. Log in to your Ride Command account or create an account. 

On the homepage, select PLAN A ROUTE in the middle of the screen. You can also click on RIDES/PLACES and then PLAN in the top right of the screen. 

To add your starting location, click on the map or use the search bar on the left side of the screen to search for your starting location.

search bar
If using the search bar or adding a stop from the points of interest on the map, be sure to click ADD TO ROUTE in the bottom left of the screen.

Add to route

route planning

Important: Ride Command does not provide turn-by-turn directions automatically and will only provide you with a straight line unless other action is taken.

To add turns to the route, you must manually add them to the route map. You can also hover over the line between destination points and drag the line to follow the route you want to take. 

How to plan a turn-by-turn route

Only when you click on locations on the map will these points be automatically added to your route. If you wish to start your ride from your current location, press the navigation target button in the bottom-left corner of the screen.

Zoom-to-location button

Continue adding stops to your ride by searching in the left-side panel or clicking on a point on the map. You can move the point to a precise location by dragging the stop, as demonstrated below.

How to plan a turn-by-turn route

Once the stop or destination is in your desired location, click ADD TO ROUTE. 

Then click to add your destination. Once satisfied with your route, name it, add any notes and click SAVE.

Then you can add waypoints to the map and add to your ride by selecting ADD TO ROUTE when hovering over the waypoint. To rearrange stop numbers, grab the three horizontal lines next to each stop number and drag them into the desired order. 

Rearrange route and stops

Next, go to the RIDES/PLACES tab on the Ride Command homepage. 

rides and places tab

Select the ride and choose DOWNLOAD in the pop-up menu. 

download ride

The file will download as a gpx. file. Once downloaded, transfer the file to a USB flash drive. 

g p x file

Turn your vehicle's key ON to boot up the Ride Command display. You do not need to start the vehicle. Plug the USB flash drive into the USB port. The location of your USB port depends on your vehicle. Consult your Owner's Manual to determine the location. 

Pull down the Polaris button to enter the settings menu. On the left side, select IMPORT/EXPORT. 

import export button

On the next screen, select COPY TO/FROM USB on the right side. 

copy to or from U S B

The left side of the next screen will display rides and waypoints currently on your vehicle. The right side will display files from your USB flash drive. Locate the file you would like to transfer onto your vehicle and press the arrow button. The file will be added to the bottom of the left list. 

transfer ride onto Ride Command display

Your planned ride can now be accessed on your Ride Command display. Exit the menu and safely remove your USB flash drive. 

To view your planned ride on your display, pull up the map icon on the bottom of your display. Then select RIDES & WAYPOINTS. 

rides and waypoints navigation

On the next screen, select the ride from the list on the left side of the screen. 

select ride

On vehicles with 2019 and newer Ride Command displays, you can transfer a ride to your vehicle by pairing a Bluetooth® device to your vehicle. For more information, read Connecting Bluetooth® Devices to 2019 and Newer Ride Command Displays.

For more information, visit the Ride Command website

Bluetooth® is a registered trademark of Bluetooth Sig, Inc.

Mots-clés plan , ride , route , command , display , USB , flash , drive , orv , ranger , rzr ,