Installation of a Polaris PRO HD Winch on a RZR XP 1000 includes the following steps:
- Preparation (0:35)
- Removal of the driver's side seat (0:45)
- Disconnecting the battery (1:00)
- Removal of the hood (1:30)
- Removal of the center console (1:45)
- Removal of the front winch cover (This will not be reinstalled) (2:28)
- Disconnecting the headlight connectors (2:45)
- Removal of the front grille (3:07)
- Front fascia removal (3:35)
- Installation of the winch mounting bracket (4:40)
- Installation of the winch (6:00)
- Installation of cables (7:33)
- Installation of the autostop fairlead onto the mounting bracket (8:35)
- Installation of the mounting bracket onto the front suspension bracket (9:28)
- Installation of the winch contactor (10:52)
- Routing wires to the contactor (11:55)
- Routing bus box cables (12:57)
- Mounting the control box (17:40)
- Mounting the wireless receiver (18:45)
- Connecting and securing wires (21:00)
- Reinstallation of the upper dash (26:00)
- Reinstallation of the front fascia (26:50)
- Reconnecting the headlight connectors (27:46)
- Reinstallation of the front grille and center console (28:05)
- Installation of the winch hook (28:25)
- Reinstallation of the hood (29:45)
- Reconnecting the battery (30:00)
- Reinstallation of the driver's side seat (30:45)
- Mounting the wireless remote (31:00)
- Testing the wireless remote (31:30)
For more on Polaris winches, visit your local Polaris Dealer.
The Polaris PRO HD 4,500-Pound Winch with Rapid Rope Recovery is part number 2882240. Read the installation instructions completely before installing.