Required Tools and Supplies
|Drain Pan||Shop Rags|
|8mm Allen Socket||Ratchet|
|Torque Wrench||AGL Gearcase Lubricant/Transmission Fluid
1 Quart (946 mL)
1 Gallon (3.78 L)
|Nitrile Gloves||Safety Glasses|
To learn more about tools, read the Tools and Fasteners Guide.
Always wear safety glasses and nitrile gloves while servicing your Polaris RZR.
To replace the transmission fluid on your RZR XP Turbo or XP 4 Turbo, follow these steps:
1. Park the vehicle on a flat, level surface.
2. Place the vehicle in PARK.
3. Place a drain pan underneath the transmission drain plug.
4. Clean the area around the fill plug. Tip: Place a rag in the bottom of the drain pan to prevent the splashing of oil.
5. Remove the transmission fill plug with an 8mm Allen socket and set aside.
6. Clean the area around the drain plug.
7. Remove the drain plug with an 8mm Allen socket and allow the oil to drain completely.
8. Clean any dirt or debris from the fill and drain plugs.
9. Inspect the O-rings on both plugs, and replace if necessary
10. Reinstall the drain plug. Torque to 14 ft-lbs (19 Nm).
11. Fill the transmission through the fill plug hole until oil reaches the bottom threads and begins to spill out. The transmission capacity is 61 ounces (1,800 milliliters). AGL Gearcase Lubricant and Transmission Fluid is part number 2878068 for 1 quart (946 ml) and part number 2878069 for 1 gallon (3.78 L).
12. Reinstall the transmission fill plug. Torque to 14 ft-lbs (19 Nm).
13. Clean any residual oil off the vehicle and inspect for leaks.
14. Dispose of the used oil properly.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
YouTube® is a registered trademark of Google Inc.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.