Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES
HELP CENTER
3/7/2022

Installing a Roof on an RS1

The above video demonstrates how to install an Aluminum Roof, part number 2882698-458, onto your Polaris RZR RS1. The video includes installing foam on the roof (0:40), removing fasteners from the intake cover (1:29), drilling holes in the intake cover (2:00) and installing the roof (2:39).

Always wear safety glasses when installing accessories on your vehicle.

Required Tools and Supplies
Scissors Metric Wrench Set Metric Socket Set
Ratchet Torque Wrench TORX® Socket Set
5/16-Inch Drill Bit Drill and Driver Safety Glasses and Nitrile Gloves

For more information on tools, read Tools and Fasteners Guide.

For more, view the installation instructions. The instructions include the part numbers for replacement parts.

To order a part, see your Polaris Dealer. To find a dealer near you, use the Dealer Locator.

TORX® is a registered trademark of Acument Intellectual Properties, LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.