Skip to content Skip to navigation Skip to footer

Installing a Roof on an RS1

The above video demonstrates how to install an Aluminum Roof, part number 2882698-458, onto your Polaris RZR RS1. The video includes installing foam on the roof (0:40), removing fasteners from the intake cover (1:29), drilling holes in the intake cover (2:00) and installing the roof (2:39).

Always wear safety glasses when installing accessories on your vehicle.

Required Tools and Supplies:

  • Safety Glasses
  • Scissors
  • Metric Wrench Set
  • Metric Socket Set
  • Ratchet
  • Torque Wrench
  • TORX® Socket Set
  • 5/16-Inch Drill Bit
  • Drill and Driver
  • Instructions

For more information on tools, read Tools and Fasteners Guide.

For more, view the installation instructions. The instructions include the part numbers for replacement parts.

To order a part, see your Polaris Dealer. To find a dealer near you, use the Dealer Locator.

TORX® is a registered trademark of Acument Intellectual Properties, LLC.