Skip to content Skip to navigation Skip to footer

Installing a Light Bar and Harness on an RS1

The above video demonstrates how to install the Pro Armor 20-Inch Dual-Row LED Light Bar and a lighting harness on your Polaris RZR RS1. The light bar kit is part number 2883107. The Polaris Pulse LED Lightbar Harness is part number 2883388. The video includes removing the visor (0:42), removing the right-hand A-pillar (0:57), removing the rear fender (1:25), removing the seat (1:50), removing the outer panel (1:54), installing the ROPS harness (2:20), installing the dash harness (4:06), installing the switch (6:10), installing the light bar (7:47), making connections (11:26), testing operation of the light bar (12:05), reinstalling the outer panel (12:38), reinstalling the rear fender (13:08), reinstalling the visor (13:38) and reinstalling the right-hand A-pillar (14:08).

Always wear safety glasses when installing accessories on your vehicle.

Required Tools and Supplies
6mm Allen Wrench Cutting Tool Pliers
Deburring Tool Metric Wrench Set TORX® Socket Set
Zip Ties Flat Screwdriver Wiring
Electrical Tape Safety Glasses Nitrile Gloves

For more information on tools, read Tools and Fasteners Guide.

For more information on the harness, view the installation instructions. The instructions include the part numbers for replacement parts.

To order a part, see your Polaris Dealer. To find a dealer near you, use the Dealer Locator.
More information can be found in the Polaris Harness Guide.

TORX® is a registered trademark of Acument Intellectual Properties, LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries  Inc.