Listed below are the parts that make up the plow mounts, frames and blades for Polaris RANGER vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount, frame or blade.
To order a replacement part for any aspect of your plow system, see your authorized Polaris Dealer. To determine if a mount, frame or blade fits your RANGER, visit the Accessories section of the RANGER website.
MOUNTS
Glacier Pro HD Plow Mount (Part Number 2879106)
The following table lists the parts included in the plow mount kit, as well as which spare kits replacements can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
1 | Mount Plate | — |
2 | Front Grille | — |
3 | Lift Rod | 1x Lift Rod Kit (2204974) |
4 | Support | 2x Hardware Kit (2204832) |
5 | M10-1.5 x 35mm Hex Bolt | 2x Hardware Kit (2204832) |
6 | M12-1.75 x 30mm Hex Bolt | 4x Hardware Kit (2204832) |
7 | M10-1.5 Nylock Flange Nut | 2x Hardware Kit (2204832) |
8 | M12-1.75 Nylock Nut | 4x Hardware Kit (2204832) |
The Hardware Kit (part number 2204832) and Lift Rod Kit (2204974) contain replacement parts. They can be ordered through your Polaris Dealer.
Mid-Size Glacier Pro HD Plow Mount (Part Number 2880261)
The following table lists the parts included in the plow mount kit as well as which spare kits contain replacements. The numbers in the table correspond to the above diagram. For more information, view the installation instructions and adjustment procedures.
Item | Description | Quantity/Found In |
---|---|---|
1 | Button Head Socket Cap Screw, M6- 1.0 x 20mm |
2x Plow Kit (2880261) 2x Plow Release Handle Kit (2204828) |
2 | Flat Washer, M6 |
2x Plow Kit (2880261) 2x Plow Release Handle Kit (2204828) |
3 | Hexagonal Bolt, M10- 1.5 x 35mm |
2x Plow Kit (2880261) 2x Plow Release Handle Kit (2204828) |
4 | Hexagonal Bolt, M10- 1.5 x 35 |
3x Plow Kit (2880261) 3x Mount Plate Kit (2879105) 3x Plow Mount |
5 | Hexagonal Bolt, M12- 1.75 x 30 |
4x Plow Kit 4x Mount 4x Plow |
6 | Nylon Nut, M10-1.5 |
1x Plow Kit 1x Winch |
7 | Nylon Nut, M12-1.75 |
4x Plow Kit 4x Mount 4x Plow |
8 | Nylon Nut, M6-1.0 |
2x Plow Kit 2x Plow
|
9 | Welded Mount Plate |
1x Plow Kit 1x Mount |
10 | Threaded Support |
1x Plow Kit 1x Mount 1x Plow |
11 | Tension Spring |
2x Plow Kit 2x Plow |
12 | Hook Bushing |
2x Plow Kit 2x Plow |
13 | Handle |
1x Plow Kit 1x Plow |
14 | Right Hook Assembly |
1x Plow Kit 1x Plow |
15 | Left Hook Assembly |
1x Plow Kit 1x Plow |
16 | Hook Shim |
2x Plow Kit 2x Plow |
17 | Hook Up |
1x Plow Kit Mid |
18 | Mid-Size Winch Link |
1x Plow Kit 1x Winch |
19 | Grille |
1x Plow Kit 1x Mount 1x Grille Kit |
20 | Lock Washer, M10 |
5x Plow Kit 5x Mount 5x Plow |
21 | Handle Sleeve |
2x Plow Kit 2x Plow |
Replacement parts are available by purchasing the Plow Release Handle Kit (part number 2204828), Mount Plate Kit (part number 2879105), Plow Mount Hardware Kit (2204831), Grille Kit (5257056), Winch Link Kit (2205057) or Mid-Mount Kit (2205418). To order a kit, see your Polaris Dealer.
Plow Release Handle Kit (2204828):
Plow Mount Hardware Kit (2204831):
Mount Plate Kit (2879105):
Grille Kit (5257056):
Winch Link Kit (2205057):
Mid Mount Kit (2205057):
Glacier HD Plow Mount (Part Number 2879105)
The following table lists the parts included in the plow mount kit and in which spare kits replacements can be found. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
---|---|---|
1 | Mount Plate | — |
2 | Front Grille | 1x Front Grille Kit (5257056) |
3 | Lift Rod | 1x Lift Rod Kit (2204974) |
4 | Support | 2x Hardware Kit (2204831) |
5 | Threaded Support | 1x Hardware Kit (2204831) |
6 | M10-1.5 x 35mm Hex Bolt |
3x Hardware Kit (2204831) |
7 | M12-1.75 x 30mm Hex Bolt |
4x Hardware Kit (2204831) |
8 | M12-1.75 Nylock Nut |
4x Hardware Kit (2204831) |
9 | M10 Lock Washer |
3x Hardware Kit (2204831) |
To purchase either the Hardware Kit (part number 2204831), Lift Rod Kit (part number 2204974) or Front Grille Kit (part number 5257056), see your Polaris Dealer.
FRAMES
Glacier Pro HD Plow Frame (Part Number 2883255)
The following table lists the parts included in the plow frame kit, as well as the spare kits in which replacements can be found. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
1 | Button Head Socket Cap Screw, M6- 1.0 x 20mm |
2x Push Frame 2x Release Handle Kit |
2 | Cotter Pin, 2mm x 10mm |
1x Push Frame 1x Kickstand Kit |
3 | Cotter Pin, 3mm x 25mm |
4x Push Frame 3x Angle Selection Kit 2x Clevis Pin Kit |
4 | Cotter Pin, 4mm x 30mm |
1x Push Frame Hardware Kit (2204826) |
5 | Flat Washer, M6 ID x 12mm OD |
1x Push 1x Kickstand Kit |
6 | Flat Washer, M6 ID x 18mm OD |
2x Push 2x Release Handle Kit |
7 | Flat Washer, M8 ID x 24mm OD |
1x Push Frame Hardware Kit (2204826) 1x Kickstand Kit |
8 | Flat Washer, 14mm ID x 28mm OD |
2x Angle Selection Kit (2204827) |
9 | Hex Bolt, M8-1.25 x 16mm |
1x Push Frame 1x Kickstand Kit |
10 | Hex Bolt, M10-1.5 x 25mm |
2x Push 2x Release Handle Kit |
11 | Hex Bolt, M10-1.5 x 30mm |
2x Push 2x Pivot Hardware Kit |
12 | Hex Bolt, M12-1.75 x 45mm |
2x Pivot Hardware Kit (2204830) |
13 | Hex Bolt, M6-1.0 x 20mm |
1x Push Frame 1x Kickstand Kit |
14 | Hex Bolt, M8-1.25 x 20mm |
2x Push Frame 2x Kickstand Kit |
15 | Nut, M12- 1.75 |
1x Push Frame 1x Kickstand Kit |
Replacement parts can be found in the Pushframe Hardware Kit (part number 2204826), Angle Selection Kit (part number 2204827), Pivot Hardware Kit (part number 2204830), Kickstand Kit (part number 2204833), Clevis Pin Kit (part number 2204892), Release Handle Kit (part number 2204828), Angle Selection "T" Pin (part number 2204829), Pivot Kit (part number 2206050), Hook Up Kit (part number 2205129), Plow Spring Kit (part number 2858534), Pushframe Kit (part number 2206049), Plow Link Kit (part number 2204974). To order a kit, see your Polaris Dealer.
Pushframe Hardware Kit (2204826):
Angle Selection Kit (2204827):
Pivot Hardware Kit (2204830):
Kickstand Kit (2204833):
Clevis Pin Kit (2204892):
Release Handle Kit (2204828):
Pivot (2206050):
Hook Up (2205129):
Plow Spring (2858534):
Pushframe (2206049):
Plow Link (2204974):
Angle Selection "T" Pin (2204829):
In the event of a collision with an obstacle at a speed greater than what the system is rated for, the angle selection T-Pin of the manual angulation mechanism is designed to shear to minimize the force of impact to the pushframe.
If the angle selection T-pin is broken, inspect all components of the plow system to see if any other system components have been damaged. If a part is damaged, the impact speed was greater than what the system is designed to support. You must then buy a replacement from your dealer.
Should you need to replace the angle selection T-Pin, a spare pin is provided in the angle lever. Follow the steps below to change your T-Pin:
1. Remove the R-Pin (62) and the clevis pin (61) that keep the angle lever (28) in place.
2. Lift the angle lever and remove the spare T-Pin (31).
3. Remove the two tension springs (39) retaining the T-Pin.
4. Remove the two pieces of broken T-Pin.
5. Insert the new T-Pin.
6. Replace the angle lever.
7. Reinstall the clevis pin and the R-Pin.
8. Reinstall the two tension springs.
Important Notes: Visit your Authorized Polaris Dealer to order a new T-Pin, part number 2204829, and replace the original spare you just removed in the event of an additional hard impact failure. The T-Pin is designed only to protect against the impacts affecting right and left ends of the blade. The T-Pin does not protect the system from a central impact. Always inspect the entire system in the event of a hard impact to ensure that no damage occurred to any system components other than the T-Pin.
Glacier Pro HD Push Frame (Part Number 2880260)
The following table lists the frame's parts, as well as in which spare kits they can be found. The numbers in the table correspond to the above diagram. For more information, view the instructions, which include installation as well as operation adjustment and procedures.
Item | Description | Quantity/Found In |
---|---|---|
1 | Rivet 4.8mm x 19mm |
4x Plow Kit (2880260) 4x Bumper Kit (2205529) 4x Plow Pivot Kit (2205530) |
2 | Carriage Bolt, M10- 1.5 x 30mm |
2x Plow Kit (2880260) 2x Blade Parts Kit (2205380) |
3 | Clevis Pin, Ø14mm x 45mm |
1x Plow Kit (2880260) 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) 1x Angle Pin Kit (2205068) |
4 | Clevis Pin, Ø14mm x 60mm |
1x Plow Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) 1x Angle Pin Kit (2205068) |
5 | Clevis Pin, Ø16mm x 40mm |
2x Plow Kit 2x Pins Kit (2205526) |
6 | Clevis Pin, Ø20mm x 115mm |
1x Plow Kit 1x Pins Kit (2205526) |
7 | Cotter Pin, Ø3 x 25mm |
5x Plow Kit 2x Angle Selector Kit (2205528) 5x Pins Kit (2205526) 2x Angle Pin Kit (2205068) |
8 | Fender Washer, M6 |
1x Plow Kit 1x Bumper Kit (2205529) |
9 | Flat Washer, M6 |
1x Plow Kit 1x Kickstand Kit |
10 | Hexagonal Bolt, M12 x 1.75 x 40 |
2x Plow Kit 2x Blade Parts Kit (2205380) |
11 | Hexagonal Bolt, M6-1.0 x 20 |
2x Plow Kit 2x Kickstand Kit |
12 | Hexagonal Nut, M12 x 1.75 |
1x Plow Kit 1x Kickstand Kit |
13 | Hexagonal Nylon Nut, M10-1.5 |
2x Plow Kit 2x Blade Parts Kit (2205380) |
14 | Hexagonal Nylon Nut, M6-1.0 |
2x Plow Kit 2x Kickstand Kit |
15 | Hexagonal Nylon Nut, M8-1.25 |
3x Plow Kit 1x Bumper Kit (2205529) 2x Blade Parts Kit (2205380) |
16 | Hexagonal Nylon Nut, M12-1.75 |
2x Plow Kit 2x Blade Parts Kit (2205380) |
17 | Lock Washer, M6 |
1x Plow Kit 1x Kickstand Kit |
18 | Socket Head Cap Screw, M8-1.25 x 60mm |
1x Plow Kit 1x Bumper Kit (2205529)
|
19 | Socket Head Cap Screw, M6-1 x 18mm |
1x Plow Kit 1x Kickstand Kit |
20 | Pivot Sleeve |
2x Plow Kit 2x Blade Parts Kit (2205380) |
21 | Tension Spring |
2x Plow Kit 2x Angle Selector Kit (2205528) 2x Pins Kit (2205526) |
22 | Kickstand Spring |
1x Plow Kit 1x Kickstand Kit |
23 | "R" Pin Short |
1x Plow Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) |
24 | Impact Stopper |
1x Plow Kit (2880260) 1x Bumper Kit (2205529) |
25 | 4 Position Bloc |
2x Plow Kit 2x Blade Parts Kit (2205380) |
26 | Trip Spring |
2x Plow Kit 2x Plow Spring Kit (2205382) |
27 | Trip Stopper |
2x Plow Kit 2x Bumper Kit (2205529) 2x Plow Pivot Kit (2205530) |
28 | Clevis Pin, Ø8mm x 45mm |
1x Plow Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) |
30 | Angle Lever |
1x Plow Kit 1x Angle Selector Kit (2205528) |
31 | Angling Outer Tube |
1x Plow Kit 1x Angle Selector Kit (2205528) |
32 | Slide Bar |
1x Plow Kit 1x Angle Selector Kit (2205528) |
33 | Shear Pin |
1x Plow Kit 1x Shear Pin Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) |
34 | Pin (Mid-Size) |
1x Plow Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) |
35 | Rubber Stopper |
1x Plow Kit 1x Bumper Kit (2205529) 1x Angle Selector Kit (2205528) |
36 | Cap |
1x Plow Kit 1x Kickstand Kit 1x Bumper Kit (2205529) |
37 | Pivot |
1x Plow Kit 1x Plow Pivot Kit (2205530) |
38 | Kickstand Shoe |
1x Plow Kit 1x Kickstand Kit |
39 | Pedal |
1x Plow Kit 1x Kickstand Kit |
40 | Compression Spring |
1x Plow Kit 1x Kickstand Kit |
41 | Pedal Support |
1x Plow Kit 1x Kickstand Kit |
42 | J Rod |
1x Plow Kit 1x Kickstand Kit |
43 | Handle |
1x Plow Kit 1x Angle Selector Kit (2205528) 1x Pins Kit (2205526) |
44 | Eye Bolt, M8-1.25 x 70 |
2x Plow Kit 2x Blade Parts Kit (2205380) |
45 | Jam Nut |
1x Plow Kit 1x Kickstand Kit |
Spare parts can be found in the Kickstand Kit (part number 2205534), Shear Pin Kit (part number 2205527), Bumper Kit (part number 2205529), Plow Pivot Kit (part number 2205530), Angle Selector Kit (part number 2205528), Pins Kit (part number 2205526), Angle Pin Kit (part number 2205068), Plow Spring Kit (part number 2205382), Blade Parts Kit (part number 2205380). To order a spare kit, see your Polaris Dealer.
Kickstand Kit (2205534):
Bumper Kit (2205529):
Plow Pivot Kit (2205530):
Angle Selector Kit (2205528):
Pins Kit (2205526):
Angle Pin Kit (2205068):
Shear Pin Kit (2205527):
In the event of a collision with an obstacle at a speed greater than that recommended for the system, the shear pin of the manual angle mechanism will break to minimize the force of impact in the frame.
If the shear pin is broken, inspect the plow system for damaged parts. If any part is damaged, the impact velocity was greater than what the system is designed to support. You must then buy a replacement part from your Polaris Dealer.
If only the shear pin is broken, the pin can be removed and installed upside down and used again. Follow these steps to change the pin:
1. Using a long nose pliers, remove the two tension springs (21) and then remove the pin (34) retaining the angle lever (30).
2. Remove the half-broken shear pin (33) and reinsert it upside down. You can get a new spare pin, part number 2205527, from your dealer.
3. Align the hole in the shear pin with the slot in the angle lever and insert the pin securing the parts in place.
4. Use a long nose pliers to reinstall the two tension springs completing the assembly.
Important notes: The shear pin is designed only to protect against the impacts affecting right and left ends of the plow. The pin does not protect the system from a center impact. Always inspect the entire plow system after a shear pin has failed to ensure no other components were damaged by the impact.
Glacier HD Plow Frame (Part Number 2882927)
The following table lists the parts included in the plow frame kit, as well as the service kits that replacements can be found in. Identification numbers correspond to the above diagram. To order a kit, see your Polaris Dealer. For more information, view the instructions, which include installation as well as operation adjustment and procedures.
Item | Description | Quantity/Service Kit |
---|---|---|
1 | Weld-Frame | — |
2 | Weld-Blade Support | — |
3 | Trip Spring |
2x |
4 | Eyebolt-M8 x 1.25 |
2x |
5 | Nut, Locking-M8 x 1.25 |
2x |
6 | Pivot Sleeve |
2x |
7 | Bolt, Pivot Sleeve- M12 x 1.75 x 40 |
2x (2207190) |
8 | Nut, Locking-M12 x 1.75 | 2x (2207190) |
9 | Winch Link | 1x (2207385) |
10 | Nut, Locking-M10 x 1.5 | 1x (2207190) |
11 | Clevis Pin, 20mm DIA. x 115mm |
1x (2207190) |
12 | Cotter Pin | 4x (2207190) (2207384) (2207385) |
13 | Lock Plate | 2x (2207385) |
14 | Lock Pin | 2x (2207385) |
15 | Lanyard | 2x (2207385) |
16 | Lanyard Choke | 2x (2207385) |
17 | Shear Pin | 1x 2205527 |
18 | Handle, Shear Pin | 11x (2207384) |
19 | Retaining Clip, Clevis Pin | 1x (2207384) |
20 | Clevis Pin | 1x (2207384) |
21 | Outer Tube, Angling | 1x (2207384) |
22 | Side Bar | 1x (2207384) |
23 | Clevis Pin, 14mm DIA. x 45mm |
1x (2207384) (2207190) |
24 | Clevis Pin, 14mm DIA. x 60mm |
1x (2207384) (2207190) |
Lock & Ride Glacier II Pushframe (Part Number 2878822)
The following table lists the parts included in the plow frame kit, as well as the service kits that replacements can be found in. Identification numbers correspond to the above diagram. To order a kit, see your Polaris Dealer. For more information, view the instructions, which include installation as well as operation adjustment and procedures.
Item | Description | Quantity/ Service Kit |
---|---|---|
1 | M12 Flat Washer | 6x (2878825) |
2 | M8 Flat Washer | 2x (2878825) |
3 | M12-1.75 x 90mm Hex Bolt | 1x (2878825) |
4 | M10-1.5 x 30mm Hex Bolt | 2x (2878825) |
5 | M12-1.75 x 50mm Hex Bolt | 2x (2878825) |
6 | M8-1.25 x 25mm Hex Bolt | 5x (2204642) |
7 | M8-1.25 x 65mm Hex Bolt | 2x (2878825) |
8 | M10-1.5 Nylock Nut | 2x (2878825) |
9 | M12-1.75 Nylock Nut | 3x (2878825) |
10 | M8-1.25 Nylock Nut | 9x (2878825) (2204642) |
11 | 13mm dia x 58mm x 2.21 N/mm locking Arm Spring (not shown) |
1x (2204642) |
12 | 41mm dia x 201mm Tension Spring | 2x (2877443) |
13 | Adjustable Blade Stop | 2x (2877504) |
14 | Latch | 2x (2877450) |
15 | Exhaust Spring | 2x (7042029) |
16 | 1/16-inch dia x 19.85-inch Cable | 1x (2877452) |
17 | Pivot Sleeve (not shown) | 1x (2878825) |
18 | Pushframe | 1x (2204640) |
19 | Pivot | 1x (2204641) |
20 | Locking Arm | 1x (2204642) |
21 | Locking Arm Bracket | 1x (2204642) |
22 | Safety Sticker | — |
23 | M8-1.25 x 60mm Eyebolt | 2x (2878825) |
BLADES
Glacier Pro HD Plow Blade - 72-Inch Poly (Part Number 2879317)
The following table lists the parts included in the plow blade kit as well as which spare kits replacements can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions. To order a kit, see your Polaris Dealer.
Item | Description | Quantity/Found In |
---|---|---|
1 | R-Pin |
2x Plow Kit (2879317) 2x Skid Shoe Kit (2205223) 2x R-Pin Kit (2205494) |
2 | Rivet |
21x Plow Kit (2879317) 21x 72-Inch Skin Kit |
3 | Cap Nut |
10x Plow Kit (2879317) 10x Rubber Deflector Flap Kit (2858541) |
4 | Carriage Bolt-M8 x 1.25 x 20mm |
10x Plow Kit (2879317) 10x Rubber Deflector Flap Kit (2858541) |
5 | Carriage Bolt-M8 x 1.25 x 25mm |
8x Plow Kit (2879317) 8x Wear Bar Kit (2204976) |
6 | Hexagonal Nut-M8 x 1.25, Self- Locking |
8x Plow Kit (2879317) 8x Wear Bar Kit |
7 | Warning Decal |
1x Plow Kit (2879317) |
8 | Rubber Snow Flap (72 Inches) |
1x Plow Kit (2879317) 1x Rubber Deflector |
9 | Rubber Flap Bracket (36 Inches) |
2x Plow Kit 2x Rubber Deflector |
10 | Cutting Edge |
1x Plow Kit (2879317) 1x 72-Inch Skin Kit |
11 | Welded Plow/ Blade Framing (72 Inches) |
1x Plow Kit (2879317) 1x 72-Inch Skin Kit |
12 | Plastic Moldboard/ Polyethylene Blade (72 Inches) |
1x Plow Kit (2879317) 1x 72-Inch Skin Kit |
13 | Skid Shoe |
2x Plow Kit (2879317) 2x Skid Shoe Kit |
Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Curb Finder Kit (part number 2879872) and Hardened Wear Bar Kit (part number 2879875).
Glacier Pro HD Plow Blade - 72-Inch Steel (Part Number 2879874)
The following table lists the parts included in the plow blade kit as well as the spare kits replacements can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
---|---|---|
1 | Blade (72 inch) | — |
2 | Wear Bar | 1x Wear Bar Kit (2204976) |
3 | Skid Shoe | 2x Skid Shoe Kit (2205223) |
4 | M8-1.25 x 25mm Carriage Bolt |
8x Wear Bar Kit (2204976) |
5 | M8-1.25 Nylon Nut |
8x Wear Bar Kit (2204976) |
6 | R-Pin |
2x Skid Shoe Kit (2205223) 2x R-Pin Kit (2205494) |
Spare parts can be obtained by purchasing the Wear Bar Kit (part number 2204976), Skid Shoe Kit (part number 2205223) or R-Pin Kit (part number 2205494).
Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Hardened Wear Bar Kit (part number 2879875) and Rubber Snow Deflector Flap Kit (part number 2858541). To order a kit, see your Polaris Dealer.
Glacier Pro Plow Blade - 72-Inch Steel (Part Number 2880270)
The follow table lists the parts included in the blade kit, as well as which spare kits the parts can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
---|---|---|
1 | Blade | — |
2 | Wear Bar | 1x Wear Bar Kit (2204976) |
3 | Skid Shoe | 2x Skid Shoe Kit (2205071) |
4 | Carriage Bolt -M8 x 1.25 x 25mm |
8x Wear Bar Kit (2204976) |
5 | Nylon Nut - M8 x 1.25 | 8x Wear Bar Kit (2204976) |
6 | R-Pin |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2208864) and the R-Pin Kit (part number 2205070). To order a replacement kit, see your Polaris Dealer.
Glacier Pro Plow Blade - 66-Inch Poly (Part Number 2880269)
The following table identifies the parts in the blade and which spare kits replacement parts can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
---|---|---|
1 | R-pin (Hairpin Cotter Pin Zinc Plated 82mm Long - 4mm Wire Dia |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
2 | Rivet (Blind Rivet Round Head Type Steel Black Zinc Plated Ø4.8mm x 13mm x 16mm Head) |
30x 66-Inch Skin Kit (2205069) |
3 | M8 x 1.25 x 25mm Carriage Bolt |
10x Wear Bar Kit (2879867) |
4 | M8 x 1.25 Self Locking Hexagonal Nut |
10x Wear Bar Kit (2879867) |
6 | Wear Bar | 1x Wear Bar Kit (2879867) |
7 | Blade Framing | - |
8 | Polyethylene Moldboard |
1x 66-Inch Skin Kit (2205069) |
9 | Plow Shoe | 2x Skid Kit Shoe (2205071) |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071), the R-Pin Kit (part number 2205070) and the 66-Inch Skin Kit (part number 2205069). To order a replacement kit, see your Polaris Dealer.
Other accessory kits that are available for purchase are the Plow Marker Kit (part number 2872726), the 66-Inch Hardened Wear Bar Kit (part number 2879868) and the 66-Inch Rubber Deflector Flap Kit (part number 2879866).
Glacier Pro Plow Blade - 66-Inch Steel (Part Number 2879868)
The following table identifies the parts in the blade and which spare kits replacement parts can be found in. The numbers in the table correspond to the above diagram. For more information, view the installation instructions.
Item | Description | Quantity/Found In |
---|---|---|
1 | Blade | — |
2 | Wear Bar | 1x Wear Bar Kit (2879867) |
3 | Skid Shoe | 2x Skid Shoe Kit (2205071) |
4 | M8-1.25 x 25mm Carriage Bolt |
10x Wear Bar Kit (2879867) |
5 | M8-1.25 Nylon Nut | 10x Wear Bar Kit (2879867) |
6 | R-Pin |
2x Skid Shoe Kit (2205071) 2x R-Pin Kit (2205070) |
Replacement parts can be found in the Wear Bar Kit (part number 2879867), the Skid Shoe Kit (part number 2205071) and the R-Pin Kit (part number 2205070). To order a replacement kit, see your Polaris Dealer.
Other accessory kits that are available for purchase are the Plow Marker Kit (part number 2872726), the Curb Finder Kit (part number 2879872), the 66-Inch Hardened Wear Bar Kit (part number 2879868) and the 66-Inch Rubber Deflector Flap Kit (part number 2879866).
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.